Customers compare OPT58FR to these similar products
Products Featured in this Video
Hi there. I'm Michael with etrailer.com. Today we're gonna take a quick look at this Opti Bright LED Dome Light. This is a low-profile Oblong Dome Light. That's gonna provide a nice bright white light for your RV's interior. So you can see around even in those low light conditions in the evening, as you're making your way to bed and that sort of thing, it is gonna be very bright.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The 12v accessory pin from the 7-way would need to be connected to the battery in order to charge it so you'd first need to make sure it was actually wired that way since not every manufacturer does. That being said the trickle charge coming from…
view full answer...Since LED lights do not require a lot of amperage you can go with relatively small wire. Using 16 or 18 gauge wire will be fine. Harness #A20WB uses 20 gauge wire which is on the small side but certainly not a problem at all for LED lights even…
view full answer...The measurement you're referring to for the Erickson Removable Motorcycle Wheel Chock #EM07506 is 8". This wheel chock has overall measurements of 11-3/4" long x 8-1/4" wide x 8-1/2" tall and will fit tires up to 6"…
view full answer...Both the Jensen JWM6A and the current model, part #JWM62A are classified as double-DIN head units, which will both use the same sized rough openings in a vehicle dash. The old #JWM6A and the current model #JWM62A both use the same pigtail, as you can…
view full answer...EZ Lube axles like the item #T3584F-EZ-8974 come from the factory with just a little bit of grease in the bearings. The first time you use the EZ Lube feature to fill the axle, it will take a lot of grease. You will probably use 3/4 to a full tube…
view full answer...The easiest way to cut the oval hole for the Rubber Grommet, #a70gb, in my opinion, would be to use a Light Mounting Bracket for 6-1/2 inch Oval Trailer Lights, BK70BB, as a template and then use a hole saw the correct size to cut a hole on each end…
view full answer...There are things that can be done to raise your gooseneck trailer suspension to help provide the proper ride height for your truck. First the capacity of the axles on your trailer should be determined, to be sure that the parts ordered will work…
view full answer...The term PC-Rated in reference to trailer lighting means Photometrically Certified. What this means in actual practice is that a light fixture is viewable from a 90-degree angle. Other non-PC-rated lights are considered to be viewable from a 45…
view full answer...We do have an option from Opti-Brite that is dimmable, the Opti-Brite LED Dome Light, #OPT48FR. This is a 1,040 lumens, surface mount light that can be connected to either a 12VDC or 24VDC power source. This produces day light white type light at…
view full answer...The overall size of the Furrion Over the Range RV Convection Microwave part#FMCM15SS is 29-15/16" wide x 16-3/8" tall x 15" deep and requires a 30" cutout. If this matches the opening and size of the model you have this will be a…
view full answer...I contacted the manufacturer about if you could get the Shur-Latch for RV Cabinet #37270315 in white. They informed me that the #37270315 is only available in brown.
view full answer...Typically, if your trailer is exposed to the elements, the breakaway battery should last at least a full season. There are many variables that can affect a batteries life expectancy. The Engager trailer breakaway #20099 includes a built in battery…
view full answer...