Customers compare TJD-25100 to these similar products
Products Featured in this Video
Today we're going to be taking a look at a square jack with a drop leg and spring return. Now this companion jack works with your e-trailer or Ram 2 speed jack part number TJD2SP-25100. It is sold separately, but it does work with that jack to raise and lower your trailer. Now this is going to be ideal for standard, agricultural, construction and industrial trailer applications. The drop leg,… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Since you are limiting your trailer to 10000lbs, and the average tongue weight is 10-15% of the trailer weight, you are looking at 1000-1500lbs tongue weight. With that said it is a good idea to use a jack with a larger capacity as it will be able to…
view full answer...We do offer several brands and models of replacement 5th wheel landing gear motors, including the Atwood 75391 that you referenced. This motor is rated for applications up to 5000-lbs tongue weight. We also offer Stromberg Carlson's #LG-217884…
view full answer...You will definitely want to go with the Road Armor Shock Absorbing Equalizer Kit #LC696740 over the MORryde as the Road Armor has more travel and will provide a smoother ride. Then, in regards to shackle straps I'm not sure what you mean by which…
view full answer...It looks like you're likely trying to replace your hubs/drums on your Dexter axle and I do believe that the "0100" you found on the spec plate actually reads "D100" since that was one of the models that Dexter had for this…
view full answer...Both the Equa-Flex Cushioned Equalizers - Double Eye Springs like #LC279687 and the E-Z Flex Heavy Duty Rubber Suspension System like the #K71-653-00 will provide an upgrade over the standard cast equalizers that most likely came on your trailer.…
view full answer...A 7k rated Dexter axle would have a 3 inch diameter so for a Dexter shock kit you would need the part #LC281281 as this would be the correct kit for your trailer.
view full answer...The JT's Strong Arm Stabilizer Kit #LC191023 paired with the either #LC314597 to adapt it to electric jacks, or #LC314592 to adapt it to hydraulic jacks, can be used with auto leveling jacks without issue. I spoke to MORryde and the #MR72AR said…
view full answer...The MORryde Premium Rubber Suspension Kit for Triple Axle Trailers part #MR62TR should not change the distance between the tires as the equalizer and shackle strap dimensions should be the same as the existing. This is basically what is being…
view full answer...For the JT's Strong Arm Jack Stabilizer Kit #LC191024 the Replacement Outer Stabilizer #LC191014 will be the one you are looking for. The T-Handles #LC314594 are sold as a 2 pack. We also have the Replacement Swing Bolt Kit #LC314595 if that was…
view full answer...For attaching the JT's Strong Arm Jack Stabilizer Kit #LC191023 to front landing gear the needed brackets are included. I attached a picture that shows how these install to landing gear jacks on the front of a trailer as well as an install video…
view full answer...Can you send me a picture of the feet of your jacks? How far apart are they?
view full answer...The MORryde Premium Rubber Suspension Kit #MR72TR is a great solution for triple axle trailers using the Correct Track Trailer Alignment and Lift Kit #RR55QX, and if your trailer has a 35" wheelbase. Wheelbase is measured from the center of one…
view full answer...