Customers compare HM47340 to these similar products
Products Featured in this Video
Hello neighbors, it's Brad here at etrailer, and today we're taking a look at the Hopkins 7-way to 4-pole adapter with built-in LED test light. Unlike a traditional adapter, this actually has a built-in LED light that lets you know that your signals are on. So right now we have our running lights on and when we run through our turn signals, these will also illuminate, and that's something that's… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
I reached out to my contact at Demco and he said that the Kar Kaddy SS #DM9713045 can be assembled by 1 person and that it typically takes about 3-4 hours. If you are a retired auto mechanic then it will likely be on the lower end as you have…
view full answer...For your 2020 Jeep Grand Cherokee I recommend the Tekonsha T-One Vehicle Wiring Harness part #118727. It's custom made for your Jeep and it gives you a 4 way flat trailer connector so you have all the lights to tow a trailer safely and legally.…
view full answer...For trailer wiring that is confirmed as a fit for your 2016 Jeep Grand Cherokee that does not require ECU flashing we have the T-One kit part #118727 which will install by plugging inline with the factory taillight harnesses your vehicle has…
view full answer...For a 2023 Jeep Wrangler Rubicon 4XE I have the following flat towing component recommendations: Baseplate: The etrailer Invisible Base Plate Kit #e98948 you referenced would be a great option as long as you still have the factory plastic bumper. If…
view full answer...The Titan Hitch Box Extension for 2-1/2 inch Trailer Hitches, item #RP45018, has two different ratings because if towed with a weight distribution system (see link) you will be able to tow higher capacities. If the extension is used as a weight…
view full answer...If none of your trailer lights are working correctly then you need to start off by checking the connector on your vehicle side of things. Use a circuit tester like part #PTW2992 and test each of the functions making sure they are operating correctly.…
view full answer...If you don't care about brakes all you need is the Mighty Cord Trailer Connector Adapter item #A10-7084VP. You would plug your Honda's 4-way into the adaptor's 4-way and then plug it into the 7-way of your trailer. The lights will…
view full answer...The Draw-Tite Max-Frame Trailer Hitch Receiver part #75699 which is a fit for a 2019 Jeep Grand Cherokee Limited X will install under the rear bumper fascia as will all of our trailer hitch options. I have attached a photo of what this will look like…
view full answer...Curt hitch ball #40038 has a 1 inch diameter shank. For Curt balls with 3/4 or 1 inch diameter shanks you would use wrench #C20001. The nut on that ball should use the 1-1/2 inch end of the wrench. You could also use a large crescent wrench if you…
view full answer...You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…
view full answer...If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…
view full answer...One easy solution for a 4-way mounting bracket that can attach to a square tube hitch like the #C13065 that you referenced is the part #18144. For a no-drill application, you can add either a short bracket #18140 or a long bracket #18136. I have…
view full answer...