Videos
for Jif Marine
Help Articles
for Jif Marine
Expert Answers
for Jif Marine
I would be happy to help! The differences between these two ladders is not that one is for flat front mounting and the other for a round front, instead the #JIF65FR is designed for pontoon boats with a round front, and the #JIF25FR is designed for…
view full answer...Hey Ryan, yeah you're right TDE is no longer a thing and unfortunately we don't carry a replacement reverse solenoid for that actuator so at this moment your best bet would be to replace the entire thing with the Dexter DX7.5L A-60 Brake…
view full answer...Yes, the strap on the #315-W3200D can be installed so that it comes from the bottom instead of the top. However, doing so will reverse the switch and the direction you turn the handle for operation. The self-locking mechanism will work either way.…
view full answer...First let's talk about capacity since you think you were overloading your Fulton XLT 1801. The reason it says max line pull is 1800 lbs first layer and 800 lbs with a full drum is that for every layer of rope wrapped around the drum the capacity…
view full answer...I attached a diagram that shows the various dimensions of Sliding Under Platform Pontoon Boat Ladder - 3 Steps - 34-1/2" Tall - 400 lbs - Stainless Steel #315-FOG3. The mounting brackets measure 11-7/8" long, 12" from outside edge to…
view full answer...Although the #348776 you'd looked at would do the job, going with a winch that has a higher capacity than what you actually need is a good idea. The winch won't need to work as hard. With this in mind, I'd recommend the #315-W2000D from…
view full answer...The Dexter drop-n-go #099-175-20 would definitely have the same capability as your TDE actuator, provided it is a disc brake setup. TDE is no longer in business so I'm afraid finding a direct replacement will be impossible. My main concern is the…
view full answer...The 3,200 lb 2-Speed Boat Trailer Winch with 20' Strap and Brake #315-W3200D will be sufficient to pull in your 3,190 lb boat if your trailer has rollers on it as that will make your boat easier to move. If you have bunks then it will technically…
view full answer...The base on 2-Speed Boat Trailer Winch #315-W2500D measures 5-3/4 inches wide by 7-1/8 inches long. I have included a picture showing this for you and a link to a video review on this winch.
view full answer...I have a solution for you. The Fulton Single Speed Trailer Winch - 10" Long Handle, w/ 20 FT Strap - 1,800 lbs, #F142306, is the winch I recommend for your application. This winch uses a 2-way ratchet system and has a solid drum design which is…
view full answer...I do have a video for the Fulton #F142401 which is nearly identical to the #F142400 that you were looking at. The only difference is that the #F142401 can be used with a strap or wire rope, while the #F142400 can be used with rope only. Other than…
view full answer...I recommend replacing your Fulton T1801 boat trailer winch with the Dutton-Lainson Hand Winch #DL17042. Fulton was acquired by First Brands in the beginning of 2023 and has had issues with manufacturing of parts including those for your Fulton winch.…
view full answer...
What our customers are saying:
"I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex"